Driving motion can be effectively controlled with the application of braking strategies. There is no way to overstate how crucial it is to maintain your brakes. It’s actually more crucial than you may imagine. Unimaginable things can occur if you don’t perform them correctly. If you waited until then, it would be too late to take the necessary action.
Table of Contents
Having good brakes is one thing, but knowing how to use them is quite another. We are all aware that brakes are employed to control vehicle motion, particularly when coming to a complete stop. But do you simply apply heavy pressure to the brakes? An accident might happen if you do that, or what technique you use while braking. Most of the time, this isn’t taught in driving schools because of haste, and you would have to learn good driving and braking techniques by yourself. You don’t have to be an experienced driver; we have created a list of the most effective ways that will help you control your brakes.
Have 1 million naira and above to Buy or Sell Cars In Nigeria?Check carlots.ng RIght Now RIght Now
The fundamentals of driving are frequently taught to novice drivers. Among other things, you must be able to drive with control, keep a steady speed, pay attention to other vehicles, and understand traffic signals. You hardly ever receive a thorough education on braking methods. These methods are crucial because they allow you the greatest amount of control. Your automobile will stop when and how you tell it to.
- Engine Braking Method
The engine brake comes in quite handy if you want to steer your car and slow it down. Effectively accomplishing this requires the following:
Immediately after pressing the accelerator, change to no-load. When performing these, there will be an immediate impact. The car’s speed will be drastically reduced by friction. When you need to immediately stop your car without further delay, this is quite crucial. Imagine coming so close to colliding with someone or something that even a second’s delay could cause harm. When travelling down a slick hill or bypassing a wet road, this method is also quite helpful. The topography of the road may cause the tyres on your car to be slippery. It enables you to maintain control over them.
- Technique For Reducing Engine Speed
When using the engine brake slowing technique, you release the gas pedal and carefully depress the brake pedal until the vehicle comes to a complete stop. It’s important to emphasize that this strategy is easy to use. It loses its desired impact when implemented firmly.
This isn’t done to bring the car to an immediate stop, unlike the engine brake approach previously explained. To put it another way, you don’t use it in an emergency. The command is received by the brake, which executes it gradually. Throughout the procedure, be sure to use your left foot to squeeze the clutch. Don’t remove it until your automobile has stopped.
- Complete-Stop Procedure For The Engine
In several situations, the foot technique is required to stop the car while it is going. Apply a light brake to slow down your car if it is reasonably far away from the object in front of you. By doing this, you can avoid your car jerking as a result of an abrupt stop.
Do not wait to engage the brakes when the object is in close proximity to you. This is preferable to hitting the target because the harm could be more severe. In order for the car’s engine to continue to run, make sure the clutch is released.
- The Use Of A Combined Braking System
For rookie drivers, the combined braking system technique seems difficult. However, with practice, it is manageable. You must immediately move to the lower level by depressing the brake pedal. This is crucial when driving up steep hills. It aids in both your own and other drivers’ protection when driving.
There are several risky circumstances where the handbrake is better utilized. Braking has become simpler than it once was because of modern automotive brake systems. However, as they can be required to avoid danger, drivers should be familiar with good braking tactics.
Frequently Asked Questions
How frequently should my brake pads be changed?
Brake pads should typically be replaced after an estimated number of miles. The lifespan of your brake pads can be impacted by the brake system’s quality, the driving conditions, and the driver’s behaviour. To verify the quality and remaining mileage of your brake pads, have your mechanic inspect them as part of routine maintenance.
Why do my brakes sound squeaky?
Squeaking may result from a variety of different factors. If you’re lucky, the rotors’ squeaking is brought on by moisture and dirt that have accumulated on them. This indicates that your brakes are still in working order. Pads, however, might also be the source of squeaking.
Conclusion
Braking methods may seem too technical and way over one’s head at the start. But as you practice and try to engage these methods, they will come to you without any hesitation. Being a good driver means knowing more than the essentials.
It might take time for you to learn these techniques, but it is rewarding in the end. Even driving schools establish courses, especially for these braking methods. You can easily enrol if you have difficulty learning them by yourself.
Have 1 million naira and above to Buy or Sell Cars In Nigeria? Check carlots.ng
All rights reserved. Reproduction, publication, broadcasting, rewriting, or redistribution of this material and other digital content on carmart.ng is strictly prohibited without prior express written permission from Carmart Nigeria - Contact: support@carmart.ng