Painting a vehicle and painting your home are two unique things. One requires a jar of paint and a couple of paint rollers or a paint sprayer, while the other includes a rundown of items, preliminaries, clear covers, and a vehicle paint sprayer.
Table of Contents
That is the reason proficient vehicle paint occupations are normally very expensive. The cycle is unpredictable and includes some expertise, yet that doesn’t mean you can’t paint your vehicle yourself without burning through cash on the following auto body shop.
Have 1 million naira and above to Buy or Sell Cars In Nigeria?Check carlots.ng RIght Now RIght Now
Strangely, repainting your own vehicle may seem like a repetitive assignment however it’s really not as troublesome as it appears. It’s basically not advanced science, and with the correct gear and direction, anyone can do it. In this post, you’ll figure out how to spray paint a vehicle regardless of whether you’ve never done it.
Materials you will need for car painting Job
- A power sander
- Sanding pads
- An air compressor
- A paint sprayer
- 1200- and 2000-grit sandpaper
- A cleaning solvent
- Newspaper
- Masking Tape
- Primer
- Enamel, acrylic enamel, or polyurethane paint
- Paint thinner
- A face mask
- Safety glasses
- Undercoat/primer
- A clear coat lacquer
- A rag
- Denatured alcohol or mineral spirits
- Rubbing compound (optional)
Planning
A legitimate paint work can’t be hurried – painting your vehicle requires a lot of time, so ensure that you have a couple of days put aside to do the work right.
Stage 1: Choose Your Location Wisely
Before you start any genuine composition, you should locate an appropriate area for your DIY project. Ensure your area offers a lot of space for working around your vehicle, and is very much ventilated and sufficiently bright. Pick a spot with power and insignificant residue. Stay away from private carports, since these regularly have heaters or radiators, which represent a fire danger when coming into contact with paint exhaust.
Stage 2: Remove rust, gouges, and trim
Ensure your paintwork doesn’t complement any flaws – fix any noticeable scratches, fix any rust, and eliminate chrome or plastic trim. Moldings and trim can be supplanted subsequent to painting are finished.
Sanding
Stage 3: Sand
Give your paint a smooth and even surface onto which it can follow – sand your whole vehicle utilizing roundabout movements, either right to the uncovered metal, to the first preliminary, or if nothing else enough for your new layer of paint to cling to.
In the event that you are lacking as expected, the third alternative will get the job done – notwithstanding, you will get the best outcomes from sanding down to exposed metal.
Stage 4: Clean
Utilizing a cloth and denatured liquor or mineral spirits, wipe down all surfaces of your vehicle completely, to eliminate any oil buildup and prepared it for painting.
Stage 5: Tape Surfaces
Use masking tape and paper to cover the surfaces of your vehicle that you don’t need painted, including mirrors, window trim, glass, barbecues and entryway handles.
Also Read: How Much Does It Cost To Paint A Car?
Preparing
Stage 6: Prime
In the event that you have sanded down your vehicle to the uncovered metal, you will need to utilize an erosion safe and self-scratching preliminary to make preparations of your vehicle.
Stage 7: Allow preliminary to fix
On the off chance that you eliminated any rust, try to prime these appropriately by feathering them until they are smooth and applying enough preliminary to the regions. Permit all preliminary to fix altogether, as indicated by directions on the holder.
Stage 8: Sand again
Sand the recently prepared surfaces again, yet be certain not to sand excessively and uncover the metal surface once more.
Stage 9: Wipe down
Wipe the prepared surfaces with a cloth somewhat hosed with more slender.
Painting
At the point when you are prepared for painting, try to follow maker’s headings and set up the paint for splashing.
Stage 10: Paint
Holding your shower firearm around 6 inches from your vehicle’s surface, and utilizing a side-to-side clearing movement, apply paint in flimsy and even covers. Normally, it will take three to four coats to totally cover the surface. Make certain to follow the maker’s drying time – this can shift from 20 moment to 60 minutes.
Stage 11: Sand and Wipe
Before you apply your last coat, sand the surfaces again to eliminate fine buildup, at that point wipe with a perfect cloth.
Stage 12: Apply veneer
Apply a reasonable coat polish, utilizing a similar artistic creation strategy.
Stage 13: Remove covering tape
Eliminate covering tape while the unmistakable coat is as yet wet, at that point permit the reasonable coat to dry as per your producer.
Stage 14: Buff
Utilizing round movements, complete your paintwork by polishing out totally painted surfaces. Additionally, you can utilize a scouring compound to draw out a shiny completion.
Have 1 million naira and above to Buy or Sell Cars In Nigeria? Check carlots.ng
All rights reserved. Reproduction, publication, broadcasting, rewriting, or redistribution of this material and other digital content on carmart.ng is strictly prohibited without prior express written permission from Carmart Nigeria - Contact: [email protected]
